ALPINE S-W8D2 8 900 Watt Car Audio Subwoofer DVC Dual 2-Ohm Sub Supply
Description
Description:
The S-Series subwoofers are designed with increased bass output and installation versatility.
ADD BASS TO PRACTICALLY ANY VEHICLE
Don t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8 S-Series subwoofers have a shallow mounting depth of just 3-3 4 and can be used in a sealed box enclosure as small as .15 cubic foot. It is perfect for under seats, behind rear bench seats in trucks, or even in some door applications.
POWER HANDLING
The 8 S-Series subwoofers are engineered with an improved voice coil allowing the woofer to benefit from it s power rating of 300 watts.
CUSTOM-STAMPED STEEL FRAME
Each S-Series subwoofer uses a custom-stamped steel frame. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents as well as a vented back plate to help cool the subwoofer voice coil and motor parts, plus a shallow design to help fit in smaller spaces.
PUSH-TYPE INSERT TERMINALS WITH DUAL VOICE COIL JUMPER SYSTEM
The push-type insert terminals help reduce the installation time of the S-Series subwoofers. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal.
STRONTIUM FERRITE DOUBLE-STACKED MAGNETS
The S-Series subwoofers use two strontium ferrite magnets stacked together, for increased motor strength and excursion which ultimately leads to more bass output.
CLEAN, CONCEALED MOUNT GASKET SYSTEM
The S-Series subwoofers have concealed mount gaskets, creating a clean, finished appearance for any vehicle.
OPTIONAL GRILLES
All S-Series subwoofers are compatible with optional grilles (sold separately) to provide added protection to the cone. The grilles feature a mesh design with a S-Series logo badge. KTE-8G: For 8” S-Series Subwoofers
Features:
- ALPINE S-W8D2 8 900 Watt Car Audio Subwoofer DVC Dual 2-Ohm Sub
- Speaker Rating:
- Max RMS Power Capacity: 300W RMS
- Peak Power Capacity: 900W Peak Power
- 8 2O+2O Subwoofer
- High Strength Custom Steel Frame
- Great complement to V-Power Amplifiers
- Frequency Response: 34Hz – 200Hz
- Mounting Depth 3-3 4
- Cutout diameter: 6-7 8
- Sensitivity: 83dB
- Recommended Sealed Box: 0.30 cubic foot (gross volume)
- Recommended Vented Box: 0.71 cubic foot (gross volume), 7 x 0.75 vent area, 15.5 vent length
- Minimum Sealed Box Volume 0.15 cubic feet
- Maximum Sealed Box Volume 0.5 cubic feet
- Minimum Ported Box Volume 0.35 cubic feet
- Maximum Ported Box Volume 0.7 cubic feet
- Top-Mount Depth 3-3 4
- Cutout Diameter 6-7 8
-
Recommended Enclosure Specifications:
Additional Information
| Title | Default Title |
|---|
