Connect your Bluetooth to the KMC3, plug into the included USB or RCA inputs, or turn on the AM FM radio. Add a wired KRC12 remote for even more control. This durable media center is ready for some fun on the water!

• Fits in gauge opening
• IPX66 certification
• Uses USB, RCA, AM FM and Bluetooth audio sources
• USB audio playback or charging
• RCA outputs
• Compatible with KRC12 Remote Commander

• Specifications:

  • Power Output @ 14.4V, 4O stereo, <10% THD+N: 25×4
  • Frequency Response [Hz]: 20-20k
  • Signal-to-Noise Ratio [dB]: 87
  • RCA Outputs: 1 Set of Pre-amp Outputs
  • Line-Out Level [V]: 2.5
  • Outer Trim Ring Dimensions [in, cm]: 3.5 x 5.5, 8.89 x 13.97
  • Protrusion From Mounting Surface [in, cm]: 1.25, 3.1
  • Mounting Depth [in, cm]: 3.9, 10
  • Mounting Hole Diameter [in, cm]: 3, 7.62
  • Mounting Panel Thickness Range [in, cm]: Any
  • IP Rating: IP66
  • AUX Input Sensitivity AUX Input Sensitivity: 500 mV
  • USB:Playback, Charging, Compatible File System: MP2, MP3, WMA, WAV16, FLAC16, DC 5V, 1 Amp, FAT32
  • BT Range (feet): 30

  • ---

    Description of TPS-CX80:

    Hifonics marine and powersports certified high end 8 inch Coincident Mounted Compression Horns featuring UHS (ultra-high sensitivity) and TALWave Technologies. Packaged as pairs (Black)

    Features:

    • Marine Grade Protection: Marine Powersports Certified
      Protected for water and dirt. UV protected against sun fade.
      
    • Tweeter Dome Material: 1 Inch Pure Titanium Compression Diaphram
      Very smooth musical response, with very high output with minimal required amplifier power
      
    • Compression Horn: Coincident Mounted Compression Horn
      Overall volume is improved as much as +5dB over conventional speakers, Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone
      
    • Surround: Natural Butyl Rubber
      Remains musical in all weather. Does not stiffen in cold.
      
    • Cone:6.5 inch Composite Poly Cone
      Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
      
    • Voice Coil Former: High Temperature Voice Coil and Former
      Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
      
    • Spider: Water resistant spider
      Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.
      
    • Cooling System: Front and Rear Venting
      Air passes through the spider and back plate to exchange air over the voice coil.
      
    • Crossover Type: 12dB Butterworth
      Smooth transition from high to lower frequencies remain musicial and not harsh or distorted
      
    • Frame: Composite ABS and glass fiber frame
      Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker
      
    • Motor: High Energy Y30 Motor assembly
      High energy strontium ferrite magnet for higher output with minimal amplifier power
      
    • Grills: Composite
      UV treated against sun fade and waterproof
      
    • Marine Certified: YES
      Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand.
      
    • IPX67: YES
      Tested to the highest Marine and Motorsports standards for resisting the elements
      
    • Tweeter Material: Titanium Dome Tweeter
      Very smooth musical response, high output with minimal required amplifier power
      
    • Marine Certified Crossover: Marine Certified Crossover
      Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
      
    • Illumination: YES
      Hardwired illumination for traditional Hifonics Blue, Red or off .
      
    • Centering Ring: YES
      Centering ring allows the speakers to tip left right when mounted to an arced mount

    • Specifications:

      • RMS Power Handling (CEA426B): 90
      • PEAK Power Handling (CEA426B): 180
      • Speaker Impedance: 4 ?
      • Frequency Response + – 10DB: 20Hz-24kHz
      • Frequency Response + – 3DB: 48Hz – 27kHz
      • Sensitivity (1 WATT 1 METER): 92dB
      • Weight With Grills & Gasket: 3.11 lbs (1.36kg)
      • Certifications: IPX6 7, Conformal Coated, UVA Certified, CEA426B
      • Dimensions: 22.5 X 10.13 X 6.13 in (57.1 X 25.7 X 15.4 cm)
      • Weight: 7.7 lbs (3.49 kg)