-50%
MB QUART Bluetooth Radio Receiver w LED For Select 2017-2020 Can-Am Maverick X3 Online now
Original price was: $449.99.$225.00Current price is: $225.00.
30 people are viewing this right now
Guaranteed safe & secure checkout
Description
Additional Information
Questions
Description
Description of MBQX-RAD-1:
Can-Am Maverick X3 UTV Tuned Audio Package: 160 Watt STAGE 1 Audio System with LED Gauge Mount Radio (AM FM BT and Apple Control) with mounting accessory and harnessing.
Works on all Can-Am Maverick X3 2017 and newer models. You get OEM quality fit and finish and MB Quart engineers have factory-matched materials and textures for a True Plug & Play installation.
Features Of MBQX-RAD-1:
- Source unit & mounting
The AM FM, Bluetooth source unit (GMR-LED) is mounted in a dash accessory that will not require the radio to be removed to access the fuse panel or diagnostic port.- Compatible vehicle fitment
Can-Am Maverick X3 2017 and newer
- Marine grade protection ipx rating
IPX67
- Source unit features
MB Quart OFF-ROAD & Marine Multimedia Source Unit with 160 Watt internal amplifier features AM FM Bluetooth.
- OFF-ROAD & Marine Multimedia Source Unit
160 Watt AM FM Bluetooth®, USB, Mobile Entertainment Controller
- Bluetooth™ Connect & Quick-Pair
Quick and secure pairing of devices with your music library with album art displayed
- USB Control
Easily connect smartphones, portable media devices and streaming services. iPod control allows full Apple® connectivity.
- Dual Audio Zone Capability
Control volume in two different areas independently, such as passenger area and tower speakers
- Radial Shift UX
Intuitive control navigation with master control and radial menu selection
- Maximum Connectivity
Connect external amplifiers for speakers and subwoofers with six channels of connectivity.
Media Screen
On board 3.5 inch high-contrast LED screen to view media artwork and external camera input
- Life shield
Marine certified to IPX67 with large waterproof buttons- Source unit specification
- RMS POWER OUTPUT
4 x 20 Watts
- PEAK POWER OUTPUT
4 x 40 Watts
- MAXIMUM THD+N AT 4 OHMS
81.2dBA
- EFFICIENCY AT FULL POWER 4 OHM (1KHZ)
0.639
IDLE CURRENT
0.3A
- MAXIMUM UNDISTORTED PREAMP VOLTAGE (WITH 20K OHM LOAD)
4 Volts
- SIGNAL TO NOISE (CTA-2006B)
Bluetooth -76.2 dBA, Aux -86.4dBA
- SIGNAL TO NOISE RATIO OF LINE LEVEL OUTPUTS (AT MAX VOLUME)
Bluetooth -76.2 dBA, Aux -86.4dBA
- PREAMP FREQUENCY RESPONSE (+ – 3.0DB)
Bluetooth 20Hz-20KHz, Aux 20Hz-20KHz
- AMPLIFIER FREQUENCY RESPONSE (+ – 3.0DB)
Bluetooth 20Hz-20KHz, Aux 20Hz-20KHz
- STEREO SEPARATION (AUX INPUT)
-64.1dB @ 5kHz
- FM MONO USABLE SENSITIVITY
13dBf 2.5µV
- AM MONO USABLE SENSITIVITY
15 – 16µV
- MINIMUM IMPEDANCE
4 Ohms
- PRE-AMP OUTPUTS
3 Pair Front Rear Subwoofer, 1 CVBS Video Output
- AUDIO INPUTS
1 Pair (Aux), 1 USB, 1 Composite Video (Camera)
- DISPLAY TYPE
The unit display features a 3.3 inch full color round LED panel
- UNIT DIMENSIONS HEIGHT
4.2 inches (107.2mm)
- UNIT DIMENSIONS WIDTH
5 inches (127.2mm)
- UNIT DIMENSIONS DEPTH FROM FACE
4 inches (99.7mm)
- UNIT DIMENSIONS TOTAL MOUNTING DEPTH
TBD
- DIMENSIONS MOUNTING HOLE
3.12 inches (7.93 cm)
- DIMENSIONS MOUNTING DEPTH
2.87 inches (7.30 cm)
- TUNER SECTION FM STEREO FREQUENCY RANGE
87.5MHz-108MHz
- TUNER SECTION SIGNAL TO NOISE RATIO
>55dB
- BLUETOOTH RANGE
32 Feet (10 Meters)
- OUTPUT VOLTAGE
2V Single Ended (4V)
- Mount harness
Plug and Play Harness. Waterproof Connectors with pre-measured wires. No guesswork, no installation mistakes.
- Time and tools
Standard hand tools are required. See the manual for time on each of the different components.- 2018-2020 Can-Am Maverick X3 Turbo (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 Turbo R (2 & 4 Seat)
- 2017-2020 Can-Am Maverick X3 X RS Turbo R (2 & 4 Seat)
- 2020 Can-Am Maverick X3 X RS Turbo RR (2 & 4 Seat)
Fit Guide of MBQX-RAD-1: